To get the mounting hardware to install the Curt Trailer hitch Receiver # 13456 you were looking at you will need to use Replacement Hardware Kit # RHK.
On the product page for the # RHK you will select Curt from the drop down menu and enter 13456 in the hitch item number field. This will get you all of the replacement hardware required to get the hitch installed.
I included videos for both of the products mentioned for you to take a look at. view full answer...
PVC Ptraps like the # D50-2215 do use a beveled cone washer when installing. When one of these leaks it can be just a matter of the nut not being tight enough or the washer needs replacing. view full answer...
Adapters like the Curt part # C57003 are designed for use on vehicles that will show a "bulb out" error code if towing a trailer with LED taillights like what your 2014 Land Rover LR4 would have. This would would well for you if your trailer and vehicle has a 7-way and you are getting that error code. view full answer...
I am sorry to hear that the tri ball portion of your Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches # D900 was stolen.
You can use the Replacement Tri-Ball for CURT Adjustable Ball Mount # C45800 to replace the portion with the 3 hitch balls.
To keep the hitch secured you may also be interested in the etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches - Flush - 3-5/8" Span - Chrome # e98881. You can use this to secure the ball mount to the hitch, another to secure the... view full answer...
There is replacement hardware available for the Curt Trailer Hitch Receiver # C13243, though a single bolt is not available, it does require the full set of replacement hardware. For that, what you will need is the Replacement Hardware Kit for Trailer Hitches # RHK.
If you'd like the replacement hardware, to order just lick # RHK, enter "C13243" in the "Hitch Item Number" box, select "Curt" from the drop-down menu.
I have added a link below to a video review for you to check out as well... view full answer...
From what I could find there shouldn't be any difference between a European wheel bolt pattern and a US pattern. With that being said, you can verify this by measuring your existing bolt pattern to make sure it matches up to what we have available. I have attached a great article that explains exactly how to do this.
In order to pick out the correct replacement hubs for your trailer, I recommend pulling an assembly and checking for the bearing numbers that are used. These numbers should... view full answer...
Yes, the fit kit # TH84JV does replace the Thule KIT4080. This will work with the AeroBlade Crossbars when paired with Evo Flush Rail or Edge Flush Rail feet. It is confirmed to fit the 2019 Land Rover Discovery. view full answer...
Thule does make a series of cargo box called the Evolution. If you have a Thule Evolution cargo box then the correct replacement hardware kit is # 43216. Yakima produces the rocket Box series of cargo box and for this the correct hardware kit is # Y8870097 (note this is sold as a single unit, so you'll need four).
For the Thule Sidekick you'd want the mounting kit # TH05603. view full answer...
To replace your Lippert electric RV stabilizer I suggest their latest model # LC298707 which offers faster operation and lighter weight than many older models. This single-motor unit extends up to 30-inches and it should match the existing mounting holes on your RV that has a Lippert stabilizer installed. I checked Lippert's website for your part number but it showed no results. view full answer...
I have a solution for you. Unfortunately, I confirmed with Westin that the Replacement Mounting Hardware Kit for Westin E-Series 3" Bull Bar with Skid Plate # 31-539PK is only designed for certain models of Ford F150s and Ford Expeditions only. Since manufacturers create specific hardware for individual models of nerf bars specially for years/makes/models of vehicles, the mounting hardware truly depends on the type of nerf bars you are looking to mount on your 2006 Land Rover LR3 HSE.
If... view full answer...
If the crossbars on your 2015 Land Rover LR4 are from Thule and have "N194" on the lock core then the correct replacement key will be # THKEYN194. view full answer...
As far as I know, both Thule and Yakima have made bike racks for Land Rover. I spoke with my contact at Thule and he said that key number 4133 is not one of their key numbers. My contact at Yakima said that all of their key numbers begin with an A and follow with 3 digits. If the number on your key is A133, rather than 4133, you will want the Yakima Replacement Key # Y8772-A133.
If this isn't the correct replacement key for you, you can send me a picture of the bike rack and the key.... view full answer...
Most of the strips we carry are sized to fit 3/8 inch channels.
I specifically recommend the Rhino Rack Vortex 15-3/4, part # RRM626. These are vortex-patterned strips that will fit 3/8 inch channels and replace your existing damaged or cut strips.
If you have Yakima bars, part # 8880634 is the specific top in fill rubber for the Yakima bars. view full answer...
Yes, to replace just the top end cap for the round upright mast on your Hollywood Racks Sport Rider Bike Rack you can use part # HR54FR. This is a direct replacement so it will work perfectly on the round upright mast of your Sport Rider Carrier. view full answer...
Thanks for the picture! I went to the Shoreland'r website and found that there is no exact replacement for the light from your 2005 Shorelandr trailer lights. They've upgraded to LED lights. I have a great set of LED's for you that are a better option than what Shoreland'r is recommending and they will not only save you money now but down the road. LED lights last 5-6x as long as incandescent builds and use a fraction of the energy.
I recommend the Wraparound LED Tail Light drivers side... view full answer...
I called my contact at Yakima and asked about T-slot adapters that can be used with the PowderHound ski carriers.
Unfortunately they do not have any T-slots that will work with the carrier and the only mounting hardware they offer is the # Y8860040. This attaches to the carrier and wraps around the crossbars. view full answer...
I am sure that the # HM40975 will work as a replacement 7-way for your 2006 Land Rover LR3, but I am not totally sure it would fit into the mounting hole you have on your vehicle. There is a chance it would, but worst case scenario you would have to use the included bracket to install the 7-way to the bumper of the vehicle.
Feel free to send me a picture of the mounting location on your vehicle though. view full answer...
As long as you use the same diameter shank you can definitely replace your 2" ball. I recommend the 2-5/16" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs # C40005. Since this has the same 1" diameter shank you will not have an issue using it with your existing ball mount. This ball has a 7,500 lb capacity and comes with a 1 year warranty. view full answer...
I looked up your 2003 Haulmark Trailer and it looks like they typically use the Jeep Style trailer fender.
If you have 12 inch wheels then # HP99VR is a steel fender option that could work for you. It will mount using your existing brackets, but if for some reason you need the brackets we offer # CE26061G-2. If you were looking for an aluminum option we offer one in diamond plate in that size # HP49VR.
I noticed you were looking at the # HP76VR. This fender accommodates 13 inch to... view full answer...
Go To Results